催化精馏合成异丙苯过程催化剂装填结构研究

为考察不同催化剂装填结构对催化精馏合成异丙苯过程的影响 ,在热态反应器中进行苯烃化催化精馏合成异丙苯的研究。反应器直径为 3 0mm ,高 2 0 0 0mm ,所用催化剂为 β改性沸石分子筛。操作压力0 .7MPa ,温度 43 0— 480K ,苯质量空速 4— 6h- 1 ,苯烯摩尔比 1.1— 2 .2 ,回流比 9— 2 0。催化剂装填结构由不锈钢填料与催化剂颗粒组成 ,三种装填结构的空隙率分别为 85 .1% ,81.6%和 79.4%。结果表明 ,对于异丙苯合成体系 ,装填结构对催化精馏的总体效果起决定性影响。在催化剂装填总量不变的前提下 ,异丙苯的选择性与丙烯的转化率均随催化剂装填结构空隙率的提高而提高。在优化条件下 ,异丙苯的选择性达97% ,丙烯转化率接近 10 0 %。催化剂装填结构对异丙苯选择性的影响比对丙烯转化率的影响更显著     

纳米助剂新进展

简述了纳米助剂的定义和制备，纳米氧化铝和纳米氧化硅助剂能显著提高涂膜的耐刮擦性而不影响光泽和透明性，纳米氧化锌助剂具有长效紫外线吸收性。     

Surface modification of water treatment equipment for reducing CaSO4 scale formation

Scale formation has been recognised as a widespread problem in membrane filtration and water desalination processing for water treatment. In this paper, the effect of surface energy of Ni-P-PTFE composite coatings on the microstructure and adhesion of CaSO₄ deposits was investigated. The surface energies of the Ni-P-PTFE coatings were altered by changing the PTFE proportion in the coatings. Initial experimental results showed that the surface energy of the coatings had a significant influence on the microstructure and adhesion of CaSO₄ deposits. The Ni-P-PTFE coatings have a potential for reducing CaSO₄ scale formation on water treatment equipment.     

Mechanisms of hydrocarbon conversion reactions on heterogeneous catalysts: analogies with organometallic chemistry

Catalysis is central to most industrial processes for chemical manufacturing. As catalytic processes have become more complex and more demanding, selectivity has become the central issue in their design. Selectivity is defined by the relative rates of competing reaction pathways available to crucial intermediates, and can be controlled by subtle changes in the nature of the catalyst, the reactants, and/or the reaction conditions. In order to be able to do this in a systematic manner, a good understanding of the catalytic reaction mechanisms is needed. Here a connection is drawn between the key elementary steps comprising hydrocarbon conversion reactions on surfaces and those known to occur on discrete organometallic complexes. This way, the hydrogenation, dehydrogenation, hydrogenolysis, chain growth, and isomerization reactions typical in heterogeneous catalysis are redefined in terms of hydride elimination, oxidative addition, reductive elimination, migratory insertion, and 1, 2-shift elementary steps, among others. It is suggested that the knowledge already available from organometallic chemistry can be used to further advance the understanding of the surface science involved in heterogeneous catalysis. Thanks to the commonality of the chemistry involved, a better synergy could also be established between homogeneous and heterogeneous catalytic development. These ideas are discussed in this article in a critical and personal way.*Invited contribution to the special volume entitled The Interface between Heterogeneous and Homogeneous Catalysis, stemming from contributions at the recent International Symposium on Relations between Heterogeneous and Homogeneous Catalysis, and dedicated to the memory of Robert L. Burwell.     

变频器在氯碱生产中的应用

介绍了交流电机变频调速的原理和注意事项,以便合理地使用变频器。     

基于Gabor多尺度空间的不变兴趣点检测

针对以往仿射不变兴趣点的特征尺度不能直接断定的问题, 提出一种基于Gabor多尺度空间的不变兴趣点检测算法。该算法主要包括三个步骤：应用Gabor滤波器组与图像卷积建立图像Gabor多尺度空间; 通过极大值准则检测兴趣点并直接断定特征尺度; 采用二阶矩矩阵描述兴趣点局部结构。实验结果表明, 相比较其他Hessian-Affine、MSER等算法, 该算法在图像模糊和JPEG压缩情况下可重复率和可匹配率均取得最好结果, 是一种能有效直接提取特征尺度的兴趣点检测算法。     

基于扩散距离和MDS的非刚性模型相似性分析

在非刚性模型相似性分析方法中, 基于测地距离的等距嵌入方法对模型拓扑变化非常敏感, 对于有局部拓扑变化的完全相似的模型也无法得到正确结果。为了弥补这一不足, 提高非刚性模型相似性分析的准确性, 将扩散距离与多维尺度分析(MDS)相结合, 计算非刚性模型的等距嵌入模型, 再利用迭代最近点(ICP)算法通过计算嵌入模型的相似性来实现原始非刚性模型的相似性分析。实例证明该方法对含有拓扑变化的非刚性模型可以得到理想的相似性分析结果。     

废硫酸裂解制酸装置转化工序技术改造

介绍了中国石油抚顺石化公司石油二厂废硫酸裂解制酸装置的运行情况及转化工序存在的问题。对该工序进行了技术改造:更换了转化反应催化剂,调整转化工序换热流程,增加了换热器,去掉转化混合器,同时增加了转化工序设备和管线的保温层厚度。改造后装置运行平稳,硫酸转化率达到设计值,并多生产硫酸520万t/a,排放尾气中SO2的质量浓度低于960mg/m3,同时节约电耗100万kWh/a,实现了经济效益和环境效益的双增长。     

Qt在EQT格式地震日志转换中的应用

主要讨论了基于Qt的地震日志格式转换软件的设计及其实现方法。     

气化炉改用脱油沥青原料系统结垢原因分析及对策

针对气化炉使用脱油沥青过程中出现的结垢问题，重点分析了其原因及机理，介绍了所采取的措施和效果。